This is something that I was playing around with this weekend while I was at a show. I have seen this knot tied with a single wire before but I wanted to try it with two wires woven together. I'm always impressed at how Corra can manipulate wire into knots and I wanted to see if this was doable. My problem was I had a picture of a bowline knot but didn't really know how to tie it. Fortunately the wire forgave me and I'm pretty happy with the way this turned out. The wire is 20 gauge and 26 gauge and I used a 6mm snapset on the end. The total length is 1 5/8".
I started my jewelry making journey in 2006 and it quickly took over my spare room and spread out into the living room. I was able to retire from my civil service job in August 2008 and I'm now able to focus on it full time.